Just some of the many featurs of Digital Pipe Fitter:

• Easy to use Windows application
• Many joints and miters to choose from
• Joints include pipes, cones and flat plates
• Options for beveled cuts, straight cuts and hand beveled cuts
• Optimized through the wall layouts to make tight fitting joint
• Unwrap the template for flat stock to roll your own pipe joints
• Reverse the template so that it can be applied to the inside of a pipe section
• Instant and transparent interopability between English and Metric units
• Combine multiple joints on one template
• Colored, zoomable previews of templates
• 3D rendered view of joint can be viewed from any angle
• 3D rendered view can be taken apart (exploded) to view inside the joint
• Can print to any printer that Windows® recognizes
• Exports template graphics to Autocad® DXF files
• Prints report with measurement needed for hand layout of cutline
• Saves groups of joints together in one project file
• Visual selection of the joint type you want
• Setting adjusts printout to compensate for template thickness
• Multiple joint constructions for most joints (allows surface, or through joints).
• Modular software design makes adding additional joints possible

Digital Pipe Fitter has an extensive list of features but is very easy to use.  Just fill in the parameters and print a template.  Advanced features like combining multiple joints on one template do not clutter up the interface but are available as a separate and special type of joint.